On June 13, the much-anticipated SNEC2024 kicked off at the National Exhibition and Convention Center (Shanghai).

As a leader in the energy storage market, Sunwoda debuted at booth 4.1H-D660.

10-meter integrated mobile energy storage vehicle · Xinjiyuan releases

At this SNEC exhibition, Sunwoda released a major launch of the 10-meter integrated mobile energy storage vehicle Xinjiyuan (hereinafter referred to as Sunwoda mobile energy storage vehicle), which is ready to go and arrive with "storage".

Currently, the Sunwoda mobile energy storage vehicle has been prototyped and will be mass-produced and launched in Q3.

According to reports, this product uses 314Ah lifepo4 battery. It is the first in the industry to use a new generation of NoahX liquid-cooled energy storage system. Compared with the same type of 10-meter mobile energy storage vehicles, it has the largest capacity, higher power, compact vehicle length, and is the first liquid-cooled, Features such as ultimate safety.

From a capacity perspective, Sunwoda's mobile energy storage vehicle has a capacity of 2MWh, which means it can store 2,000 kilowatt-hours of electricity when fully charged. Compared with its peers' 10-meter mobile energy storage vehicles (generally with a capacity of 500kWh), the capacity has increased by 300%, which is 10 meters. It is the world's largest capacity mobile energy storage vehicle in the size of an integrated vehicle.

If used to charge new energy vehicles equipped with 50 kWh of electricity, a fully charged Sunwoda mobile energy storage vehicle can charge 40 vehicles.

From a power point of view, the power of Sunwoda mobile energy storage vehicle has exceeded 800kW, which is 220% higher than the common 250kW power on the market. It greatly increases the charging speed and shortens the system charging time.

In addition, the Sunwoda mobile energy storage vehicle is also equipped with two fast-charging guns, each of which outputs 120kW high-power power supply, meeting the core needs of rapid power replenishment for vehicle rescue and fast charging of vehicles in high-speed service areas; and it also supports the upgrade configuration of liquid-cooled ultrasonic batteries. Charging gun, supports maximum power output of 480kW.

From the perspective of body length, there are also mobile energy storage vehicles on the market with a capacity of 2MWh, but their overall vehicle length reaches 13 meters or more. That is to say, under the same system capacity, Sunwoda's 10-meter integrated mobile energy storage vehicle is more than 3.4 meters shorter than other products. It reduces the driver's operation in areas with smaller turning sizes (such as residential areas, small roads, mountains, etc.) Difficulty, improve the driving flexibility of the vehicle, and can adapt to more application scenarios.

From the perspective of cooling efficiency, Sunwoda mobile energy storage vehicles are the first to apply liquid cooling technology to mobile energy storage vehicle systems. Compared with the air-cooling technology route, liquid-cooling technology has smaller system temperature differences and higher efficiency, thereby extending the service life of the battery. At the same time, with the support of liquid cooling technology, the energy density of the vehicle battery has achieved a qualitative leap.

From a safety perspective, Sunwoda mobile energy storage vehicles have adopted multiple safety designs from sub-components to the entire system to ensure that the mobile energy storage vehicle system does not lose control, fire or explode.

Solve many pain points in the market

In the analysis of various characteristics of Sunwoda mobile energy storage vehicles, its advantages in mobile charging are mentioned, which indeed solves the pain points of electricity consumption in road rescue and holiday travel.

But it can not only be used for charging new energy vehicles, after all, its essence is energy storage.

Mobile energy storage vehicles can meet the power supply problem of non-stop power grid maintenance operations.

In construction sites, mines, oil fields and many other fields, power supply is a very important part. However, often due to the remote geographical location of the construction site or the difficulty in accessing the surrounding power grid, on-site construction equipment lacks sufficient power support.

Mobile energy storage vehicles are a solution to the problem of temporary power consumption in engineering construction.

In addition, mobile energy storage vehicles are also playing an increasingly important role in use scenarios such as emergency disaster relief and ensuring power supply for major events.

In the past, traditional diesel generator vehicles were used in areas where mobile energy storage vehicles could now replace diesel generator vehicles. A brief comparison shows that mobile energy storage vehicles have great advantages in terms of mobility, low noise, intelligence, environmental protection, response speed, and cost.

For example, in terms of the most sensitive cost, the electricity cost of clean energy used by mobile energy storage vehicles is about 0.5 yuan per kilowatt hour, which is much lower than the 3 yuan per kilowatt hour of diesel power generation.